LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1997 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Body Control Computer Tests >> Instrument Cluster Test 1B - Inoperative Gauge

Instrument Cluster Test 1B - Inoperative Gauge

NOTE: Perform INSTRUMENT CLUSTER TEST 1A  before proceeding with this test. For connector terminal ID, see CONNECTOR IDENTIFICATION  and WIRING DIAGRAMS  . Perform TEST VER-1A - VERIFICATION PROCEDURE  after each repair.
CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Disconnect Mechanical Instrument Cluster (MIC) and ensure connectors are clean and not damaged. Remove inoperative gauge. Inspect printed circuit board and gauge connections. Repair printed circuit board as necessary. If printed circuit board is okay, replace inoperative gauge. Recalibrate gauge using scan tool.

scientia non olet · About LEMON Manuals