Power Window Switch Test

Remove power window switch. See DRIVER'S WINDOW SWITCH or PASSENGER'S WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check power window switch continuity. See appropriate WINDOW SWITCH CONTINUITY table. See Figure or Fig 1 . If continuity is not as specified, replace power window switch.

WINDOW SWITCH CONTINUITY (DRIVER'S)

Switch Position

Continuity Between Terminals No.

Off

2 & 10; 3 & 10; 4 & 10; 7 & 10; 8 & 10; 9 & 10; 10 & 11; 10 & 12

Left Front

1 & 7; 8 & 10

Right Front

1 & 12; 10 & 11

Left Rear

3 & 10; 1 & 2

Right Rear

1 & 4; 9 & 10

Down

Left Front

1 & 8; 7 & 10

Right Front

1 & 11; 10 & 12

Left Rear

3 & 1; 2 & 10

Right Rear

4 & 10; 1 & 9

Window Lock

Breeze, Cirrus & Stratus

1 & 5

Sebring Convertible

⁽¹⁾

⁽¹⁾	Not applicable.

WINDOW SWITCH CONTINUITY (PASSENGER'S)

Switch Position	Continuity Between Terminals No.
Off	2 & 5; 1 & 4
Up	1 & 4; 5 & 6
Down	2 & 5; 1 & 6

Fig 1: Identifying Passenger Window Switch Terminals

Courtesy of CHRYSLER CORP.