LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1993 >> Sundance Base, 4D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Body Control Computer) >> Diagnostic Procedure >> Entering On-Board Diagnostics >> DRB-II Continuity Meter Mode

DRB-II Continuity Meter Mode

WARNING: This page is about a different car, the 1993 Dodge Daytona and 1993 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

Press VOLT/OHM key 3 times. Display will read NO CONTINUITY. Touch test probe to connector or wire to be measured. Read continuity on DRB-II display. When continuity testing is complete, press VOLT/OHM key once to exit continuity meter mode.

scientia non olet · About LEMON Manuals