LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Voyager Base, Standard >> Repair and Diagnosis >> Body & Frame >> Seats - Power >> Testing >> Motor Test >> Rear Motor

Rear Motor

  1. Remove switch from mounting position and disconnect switch from harness. See SWITCH  under REMOVAL & INSTALLATION.
  2. Connect jumper wire between terminals No. 2 and 10. See Fig 1 . Connect second jumper wire between terminals No. 6 and 3. If motor does not operated, reverse jumpers (No. 2 to No. 3, and No. 6 to No. 10). If motor still does not operate check wiring between switch connector and motor assembly. If wiring is good, replace motor assembly.
  3. If all motors and seats operate properly, proceed to the SWITCH TEST  .
Fig 1: Identifying Power Seat Switch Terminals
G50B15918Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals