LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Voyager Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats - Power >> Testing >> Harness Voltage Test

Harness Voltage Test

NOTE: This test will determine whether or not voltage is continuous through body harness to power seat switch.
  1. Remove power seat switch from mounting position and disconnect switch from wiring harness. See SWITCH  under REMOVAL & INSTALLATION.
  2. Connect lead of test light to ground terminal (Black  wire) of center section. Touch other test light lead to Red  wire terminal.
  3. If test light comes on, harness to switch is good. If test light does not come on, perform CIRCUIT BREAKER TEST  .
scientia non olet · About LEMON Manuals