Brake Switch Test
Disconnect brake switch 6-pin connector. Using an ohmmeter, check for continuity at switch side of connector terminals. See the TESTING BRAKE SWITCH . If continuity is not as specified, check brake switch adjustment. If switch adjustment is okay, replace defective brake switch.
TESTING BRAKE SWITCH
| Pedal Position | Check Between Pin Nos. | Continuity |
|---|---|---|
| Released | 1 & 4 | Yes |
| 3 & 6 | Yes | |
| 2 & 5 | No | |
| Depressed | 1 & 4 | No |
| 3 & 6 | No | |
| 2 & 5 | Yes | |