Air Bag Precautions: Notes

NOTE: For additional information on air bags or SRS system, see AIR BAG RESTRAINT SYSTEM article in ACCESSORIES/SAFETY EQUIPMENT section.

Follow precautions when working with air bag systems:

When performing air bag repairs, disable SRS system. Use caution when handing a sensor.
Never strike or jar a sensor. All sensors or mounting bracket bolts must be carefully torqued to ensure proper sensor operation.
Never apply power to SRS system if a sensor is not rigidly attached to vehicle.
To avoid accidental air bag deployment while trouble shooting SRS system, DO NOT use electrical test equipment, such as battery-powered or AC-powered voltmeter, ohmmeter, etc.
Always carry air bag module with trim cover away from body. Always place inflatable module on workbench with trim cover up, away from loose objects.
DO NOT install used air bag part from another vehicle. Use new parts only. DO NOT disassemble or tamper with air bag assembly.
Wait at least 30 seconds after disconnecting battery before proceeding with repairs or trouble shooting system. Some manufacturers recommend waiting up to 20 minutes before making SRS repairs. For a short time after battery is disconnected, SRS system retains enough voltage to deploy air bag.

WARNING: Wait about 2 minutes after disconnecting negative battery cable before servicing air bag system. System reserve capacitor maintains air bag system voltage for about 2 minutes after battery is disconnected. Servicing air bag system before 2 minutes may cause accidental air bag deployment and possible personal injury.

NOTE: Complete system deactivation should be performed only when Air Bag Restraint System (ABRS) is not functioning properly and vehicle needs to be driven.