LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Horizon Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Wiper/Washer System) >> Testing >> Two-Speed Function Tests >> Motor Does Not Continue To PARK Position

Motor Does Not Continue To PARK Position

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 Dodge Dynasty, 1990 Dodge Daytona, 1990 Chrysler New Yorker Fifth Avenue, 1990 Chrysler New Yorker, and 1990 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect motor wiring harness and clean terminals. If problem persists, turn switch to OFF position. With motor harness disconnected, connect voltmeter or test light to ground strap and terminal No. 2 of wiring connector.
  2. If voltage is NOT present, check for open in wiring harness or switch. If voltage is present, connect ohmmeter or continuity tester between terminals No. 3 and 1. See Fig 1 . If continuity exists, replace motor. If continuity does NOT exist, repair open in switch or harness.
Fig 1: Checking Resistance Between Terminals No. 3 & 1
G90D14467Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals