LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1989 >> Gran Fury 5.2 P >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 5.2L EFC System/Testing >> Removal & Installation >> Spark Control Computer >> Removal & Installation

Removal & Installation

Disconnect negative battery terminal. Disconnect 10-wire and 12-wire connectors from computer. Remove vacuum hose from vacuum transducer. Remove mounting screws from inside air cleaner and remove computer. To install, reverse removal procedure.

NOTE: Computer is not serviceable. DO NOT  attempt to take it apart for any reason. Also, if the vacuum transducer becomes defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals