LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1988 >> Caravelle Base, 2.2 D >> Repair and Diagnosis >> Engine Performance >> System >> 2.2L Turbo Tests W/Codes >> Description >> Engine Running Test Mode

Engine Running Test Mode

  1. Connect diagnostic tool to engine harness connector. Engine running test mode can performed with engine at idle, transmission in neutral and parking brake on, or while driving the car.
  2. To select a test code, move switch to "Read" position, depress actuator button until the desired code appears.
  3. Release actuator button, switch read/hold switch to "Hold" position. The SMEC will monitor that system test and results will be displayed.
NOTE: If using a diagnostic readout box other than Chrysler's DRB II, follow manufacturer's instructions on how to connect readout box and obtain codes. Some of these other readout boxes will display information that is not contained in this testing. This information may not be relative to diagnosing a problem. Only information in this article should be used during diagnosis.
scientia non olet · About LEMON Manuals