LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1987 >> Horizon Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> EFC System >> Removal & Installation >> Spark Control Computer >> Removal & Installation

Removal & Installation

  1. Disconnect 10-pin and 14-pin connectors from computer. Remove outside air duct from computer. Disconnect vacuum hose from vacuum transducer.
  2. Remove 3 mounting screws that hold computer to fenderwell and remove computer. To install, reverse removal procedure.
NOTE: Computer is not serviceable. Do not attempt disassembly for any reason. If vacuum transducer is defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals