Fluid Pressure Testing
- Disconnect pressure hose from oil pump. See Fig 1 . Bleed air from system. Start engine and let it idle. Turn steering wheel several times until temperature reaches 122°F (50°C). Set engine idle speed to 1000 RPM.
- Close and open valve to measure oil pump pressure. If not within specifications, replace the power steering pump. Refer to the OIL PUMP PRESSURE SPECIFICATIONS table. Install pressure hose. Bleed system.
CAUTION:
DO NOT
leave valve on pressure gauge closed more than 10 seconds or damage to oil pump will result.
OIL PUMP PRESSURE SPECIFICATIONS
| Application | psi (kg/cm2 ) | ||
|---|---|---|---|
| Colt Vista | |||
| Valve Closed | |||
| 2WD | 780-880 (55-62) | ||
| 4WD | 920-1000 (65-72) | ||
| Valve Open | 142 (10) | ||
| Colt | |||
| Valve Closed | 780-880 (55-62) | ||
| Valve Open (Maximum) | 142 (10) | ||