LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1984 >> Conquest Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Checking Fluid Level

Checking Fluid Level

  1. Park vehicle on level area. Oil must be at normal operating temperature, parking brake engaged and engine at idle. Place select lever in each gear, momentarily.
  2. Place selector in "N" position and clean area around dipstick tube. Ensure that fluid level is between lower and upper marks, but never over upper mark. Add or drain fluid as necessary.
CAUTION: If severe darkening of the fluid and a strong odor is noted, fluid and filter should be changed and bands adjusted.
scientia non olet · About LEMON Manuals