SOLEX (MIKUNI) DIDTA 2-Barrel: Overhaul: Inspection
- Clean all parts removed, using care not to damage diaphragms with solvent. Check throttle valve and choke valve shafts for operation.
- Check jets for damage or clogging using compressed air. Never use wire or other metal objects.
- Check idle mixture adjusting screw for grooves, ridges or other damage. Check needle valve assembly, strainer screen and vacuum chamber.
- Using battery, check fuel cut-off solenoid operation. Solenoid needle should move in when attached to battery, and out when disconnected.
- Thoroughly inspect carburetor main body, throttle body and float chamber cover for cracks or other damage.