LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1981 >> Reliant Base, 4D Sedan, 2.2L Eng VIN B, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Fuel Control >> Removal & Installation >> Spark Control Computer >> Removal & Installation

Removal & Installation

  1. Remove battery. Disconnect 10-wire and 6-wire connectors from computer. Remove outside air duct from computer. Disconnect vacuum hose from vacuum transducer.
  2. Remove 3 mounting screws that hold computer to fenderwell and remove computer. To install, reverse removal procedure.
    NOTE: Computer is not serviceable. Do not attempt to take it apart for any reason. Also, if the vacuum transducer becomes defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals