LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1981 >> Reliant Base, 2D Sedan, 2.2L Eng VIN B, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Fuel Control >> Testing >> Electronic Fuel Control System Tests >> Coolant Sensor Test

Coolant Sensor Test

Turn ignition switch off and disconnect wire connector from sensor. Connect ohmmeter leads to sensor terminals. With engine cold and ambient temperature below 90°F, resistance should read 500-1000 ohms. With a hot engine, resistance should be greater than 1300 ohms.

NOTE: The coolant sensor resistance will continually change with changes in engine temperature. It is not a switch.