LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1976 >> Arrow Base, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Bearing Adjustment >> Arrow & Colt >> All Models

All Models

Tighten adjusting nut to 14.5 ft. lbs. After seating bearing components, loosen nut to 0 ft. lbs. Now make final adjustment to 3.6 ft. lbs. After installing lock cap, insert cotter pin.

NOTE: Do not loosen adjusting nut more than 15 degrees to align spindle holes.
scientia non olet · About LEMON Manuals