| 3 Spd Trans,4WD | | 2.4 | 1.8 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Two Piece Driveline add | | 0.2 | | C |
| Where Dual Exhaust interferes add | | 0.3 | | C |
| Where Remote Control interferes add | | 0.2 | 0.2 | C |
| Where Skid Plate interferes add | | 0.4 | 0.4 | C |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: |
| | 0.9 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| | 0.6 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.9 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.4 | | C |