LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1963 >> Valiant Base, 2.8L Eng, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> HOLLEY Single Barrel Model 1920 >> 1967 Models >> Checking Choke Assembly for Distortion

Checking Choke Assembly for Distortion

Remove choke assembly from engine and cool in water at 70-75°F. After cooling, extend choke rod for zero clearance between choke lever and housing. In this position, choke coil hook should contact rod end. If coil does not contact rod, coil has been distorted and new Choke Assembly, Part No. 2658398, should be installed. If coil not distorted rework coil hook as follows:

scientia non olet · About LEMON Manuals