LEMON Manuals: Even more car manuals for everyone
Home >> Peugeot >> 1988 >> 505 SW8, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System

Bleeding Brake System

NOTE: Turn ignition switch to "OFF" position. Depress brake pedal at least 25 times to release brake system pressure.
  1. Fill brake system. Open left front wheel bleeder screw and depress brake pedal. Tighten bleeder screw. DO NOT pump brake pedal. Continue this procedure until fluid contains no air. Bleed right front wheel using the same method.
  2. Release brake system pressure. Connect bleed hose to left rear wheel. Partially depress brake pedal. Turn ignition on. Release brake pedal when brake fluid is flowing without air bubbles. Tighten bleeder. Turn ignition off. Depressurize brake system and bleed right rear wheel using the same method.
scientia non olet · About LEMON Manuals