LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1758 (Wiper System & Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the mounting location on the windshield using a clean lint free cloth with isopropyl alcohol.
    2. Fig 1: Rain Sensor And Retaining Ring
    GM756193Courtesy of GENERAL MOTORS CORP.
  2. Install the rain sensor (1) to the windshield.
  3. Connect the electrical connector to the rain sensor (1).
scientia non olet · About LEMON Manuals