LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1758 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the washer solvent container. Refer to Washer Solvent Container Replacement (Envoy, TrailBlazer)  or Washer Solvent Container Replacement (Rainier) .
    2. Fig 1: Locating Washer Solvent Container Level Sensor
    GM1333187Courtesy of GENERAL MOTORS CORP.
  2. Using 2 flat-bladed tools, gently pry the level sensor switch (2) from the container (1).
  3. Remove the level sensor switch grommet and discard.
scientia non olet · About LEMON Manuals