LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1757 (Frame And Underbody) >> Repair Instructions >> Assist Step Support Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Assist Step Nuts And Fasteners
    GM750777Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Position the assist step to the support brackets.

    Install the nuts (1) that retain the assist step to the support brackets.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

    2. Fig 2: Assist Step Support Bracket
    GM743500Courtesy of GENERAL MOTORS CORP.
  2. Position the assist step assembly to the vehicle.
  3. Install the bolts that retain the support brackets to the body.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
scientia non olet · About LEMON Manuals