LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Body Front End) >> Repair Instructions >> Wheelhouse Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheelhouse Liner, Bolts And Push - Pins
    GM750118Courtesy of GENERAL MOTORS CORP.
  1. Install the wheelhouse liner to the vehicle.
  2. Install the push-pins that retain the wheelhouse liner to the body.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolt that retains the wheelhouse liner to the rocker molding.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals