LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Body Front End) >> Repair Instructions >> Hood Latch Support Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Latch Support And Radiator Support Retaining Bolts
    GM749967Courtesy of GENERAL MOTORS CORP.
  1. Install the hood latch support to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts that retain the hood latch support to the radiator support.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  3. Install the hood latch. Refer to Hood Latch Replacement  .
  4. Install the headlamp housing panel. Refer to Headlamp Housing Panel Replacement (TrailBlazer)  or Headlamp Housing Panel Replacement (Envoy, Envoy XUV, Rainier)  .
scientia non olet · About LEMON Manuals