LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1744 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (5.3L Engine) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Generator Electrical Connector
    GM898329Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 5.3L.
  3. Disconnect the generator electrical connector.
    4. Fig 2: View Of Generator Cable Boot, Head, Nut & Bolt
    GM899614Courtesy of GENERAL MOTORS CORP.
  4. Remove the generator cable (3) from the generator, perform the following:
    1. Slide the boot (1) down revealing the terminal stud.
    2. Remove the generator cable nut (2) from the terminal stud.
    3. Remove the generator cable (3).
    5. Fig 3: View Of Generator & Bolts (5.3L)
    GM899619Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator bolts.
  6. Remove the generator.
scientia non olet · About LEMON Manuals