Disabling Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel until the vehicle wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
- Remove the connector position assurance (CPA) from the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
- Disconnect the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
IMPORTANT:
Refer to SIR Disabling and Enabling Zones before disabling the SIR system.
IMPORTANT:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.