Disabling Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel until the vehicle wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Access the instrument panel (I/P) module connector through glove box.
- Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
- Remove the connector position assurance (CPA) from the I/P module yellow 4-way connector (1) located behind the I/P support.
- Disconnect the I/P module yellow 4-way connector (1) located behind the I/P support.
IMPORTANT:
Refer to SIR Disabling and Enabling Zones before disabling the SIR system.
IMPORTANT:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.