LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1743 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Vehicle Rollover Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Vehicle Rollover Sensor
    GM1526913Courtesy of GENERAL MOTORS CORP.
  1. Fold back the rear carpet in order to gain access to the sensor. Refer to Carpet Replacement - Rear (TrailBlazer EXT, Envoy XL) or Carpet Replacement - Rear (Envoy XUV) or Carpet Replacement - Rear (Trailblazer, Envoy, Rainier) in Interior Trim.
  2. Disconnect the electrical connector.
  3. Remove the nuts securing the rollover sensor to the floor panel.
scientia non olet · About LEMON Manuals