LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1739 (Interior Trim) >> Repair Instructions >> Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bezels to the headliner.
  2. Rotate the bezels in order to seat the bezel retaining tabs above the headliner.
  3. Fig 1: Removing Handle From Roof Panel
    GM735656Courtesy of GENERAL MOTORS CORP.
  4. Install the front and rear roof panel tabs into the bezels.
  5. Fig 2: Plastic Retaining Tab And Roof Panel Tab
    GM787593Courtesy of GENERAL MOTORS CORP.
  6. Ensure the top of the roof panel tab (2) is positioned over the plastic retaining tab (1).
  7. Fig 3: Front Roof Panel Tab
    GM738047Courtesy of GENERAL MOTORS CORP.
  8. Using a flat bladed tool, carefully push up on the bottom of the front roof panel tab (1) until fully seated.
  9. Using a flat bladed tool, carefully push on the bottom of the rear roof panel tab until fully seated.
  10. Close the bezel covers.
  11. Pull downward on the assist handle to ensure the handle is fully secured to the roof panel.