Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the mirror (2) onto the support button (1).
- Install the set screw.
Tighten: Tighten the set screw to 2 N.m (18 lb in).
- Connect the wire cover to the upper mirror base.
- Connect the electrical connector (1), if equipped.
- Reposition the mirror.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.