LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1726 (Seat System) >> Repair Instructions >> Seat Back Panel Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Seat-Back Frame Panel
    GM753523Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back over the top of the seat-back frame.
    2. Fig 2: Seat Back Panel Push-Pin Fasteners
    GM753491Courtesy of GENERAL MOTORS CORP.
  2. Install the panel to the seat-back frame with 2 push-pin fasteners (1) to each side of the panel.
    3. Fig 3: Bottom Panel Push-Pin Fastener
    GM784461Courtesy of GENERAL MOTORS CORP.
  3. Install the push-pin fastener (1) to the bottom of the panel.
    4. Fig 4: Lumbar Cables
    GM753524Courtesy of GENERAL MOTORS CORP.
  4. Install the lumbar cables to the panel clips.
  5. Install the front seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  6. Install the front bucket seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals