LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1726 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the lumbar switch.
  2. Install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated.
  3. Install the power seat switch. Refer to Seat Switch Replacement - Power .
  4. Install the switch bezel assembly to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals