LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1750 (Navigation Systems) >> Repair Instructions >> Antenna Replacement - GPS Module Assembly Radio Antenna >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting Navigational Radio Electrical Connector
    GM1226967Courtesy of GENERAL MOTORS CORP.
  1. Install the antenna module to the vehicle.
  2. Install the screw retaining the antenna module to the cross-car beam (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the screw.

    Tighten:  Tighten the screw to 2.5 N.m (22 lb in).

  4. Install the I/P assembly. Refer to Instrument Panel (I/P) Assembly Replacement in Instrument Panel Gages and Console.
  5. Connect the electrical connector to the navigational radio (1).
  6. Install the navigational radio. Refer to Radio Replacement .
scientia non olet · About LEMON Manuals