LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.2L (Introduction) >> Repair Instructions >> Quick Connect Fitting(s) Service (Plastic Collar) >> Installation Procedure

Installation Procedure

    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fuel Pipe Fitting Caution in Cautions and Notices.
  1. Apply a few drops of clean engine oil to the male connection end.
    2. Fig 2: Connecting Quick-Connect Fittings
    GM21855Courtesy of GENERAL MOTORS CORP.
  2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
    3. Fig 3: Ensuring Secure Connection
    GM155399Courtesy of GENERAL MOTORS CORP.
  3. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.
scientia non olet · About LEMON Manuals