LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Traction Control Switch Replacement (GMC, Chevrolet) >> Installation Procedure

Installation Procedure

    Fig 1: Traction Control Switch Electrical Connector (GMC, Chevrolet)
    GM651279Courtesy of GENERAL MOTORS CORP.
  1. Position the traction control switch to the trim plate
  2. Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
  3. Connect the electrical connector to the traction control switch.
  4. Install the accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (GMC) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Oldsmobile/Buick) , Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile/Buick) in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals