LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Support Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Lumbar Cable Routing
    GM755853Courtesy of GENERAL MOTORS CORP.
  1. Hook the cable end into the lumbar mechanism.
    2. Fig 2: Accessing Lumbar Mechanism
    GM755852Courtesy of GENERAL MOTORS CORP.
  2. Install the cable to the lumbar spring.
    3. Fig 3: Locating Lumbar Cable Clip On Lower Seat Back
    GM755850Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar cable (2) in the cable clip (1) located on the lower seat back.
    4. Fig 4: Locating Cable To Seat Adjuster Screws
    GM755848Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install 2 screws (1) securing the cable to the seat adjuster.

    Tighten:  Tighten the lumbar cable screws to 6 N.m (53 lb in).

  5. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  6. Install the seat trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
  7. Install the seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals