LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Transfer Case - NVG 126-NP4 >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Locating Access Panel
    GM752114Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The access panel is removed in order to visually see the electrical connectors and the location of the transfer case control module. It will also be easier to see the mounting and alignment slots for the transfer case control module mounting bracket.
  1. Remove the access panel.
    2. Fig 2: Removing/Installing Closeout/Insulator Panel - Left
    GM712800Courtesy of GENERAL MOTORS CORP.
  2. Remove the left side closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel Gages and Console.
    3. Fig 3: Removing/Installing Transfer Case Control Module
    GM1442999Courtesy of GENERAL MOTORS CORP.
  3. Remove the transfer case control module (1) and mounting bracket from the instrument panel mag beam.
  4. Disconnect the three electrical connectors from the transfer case control module.
  5. Remove the transfer case control module from the mounting bracket.
scientia non olet · About LEMON Manuals