LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Bravada RWD >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

  1. Install the stud into the axle flange.
  2. Install the 4 washers and the lug nut to the stud.
  3. Tighten the lug nut in order to draw the stud into the flange until the stud fully seats.
  4. Remove the lug nut and the washers.
  5. Install rotor.
  6. Install the tire and wheel.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals