Conditions For Running DTC

DTCs P0105, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0128, P0201 P0202, P0203, P0204, P0205, P0206, P0300-P0306, P0336, P0440, P0442, P0446, P0452, P0453, P0506, P0507, P0601, P0602, P0604, P0606, P1120, P1220, P1221, P1271, P1275, P1280, P1441, P1484, P1512, P1514, P1515, P1516, P1621, P1635, P1639, P1680, or P1681 not set.
ECT sensor parameter is more than 158°F (70°C).
Engine speed parameter is 1000-2500 RPM.
Ignition 1 signal parameter is more than 10 volts.
Engine run time parameter is more than 200 seconds.
Loop status parameter is closed.
TP sensor Indicated Angle parameter is 5-30 percent.
EVAP purge solenoid command is more than 10 percent.
Fuel level sensor parameter is more than 10 percent.
MAP sensor parameter is 7.4-31.0 in. Hg (25-104 kPa).
Air flow calculated parameter is more than 16 g/s.
Conditions are met for 60 seconds.