DTC P0446: EVAP Vent Valve Control Circuit: Description

A restricted or blocked Evaporative (EVAP) emission vent path is detected by the Powertrain Control Module (PCM) commanding the purge valve ON (open) and the vent valve ON (closed) allowing a vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the PCM commands the purge valve OFF (closed) and the vent valve OFF (open) while monitoring the Fuel Tank Pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to about zero in. H2O in a calibrated time, DTC P0446 will set.