LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Ignition Systems >> Ignition Coils >> Installation

Ignition Coils: Installation

  1. Install ignition coil(s) into engine. Ensure ignition coil(s) are properly seated to the valve cover. Install and tighten ignition coil retaining bolt(s) to specification. See TORQUE SPECIFICATIONS .
  2. Reconnect ignition coil(s) harness connector(s). Reinstall air cleaner resonator. Tighten air cleaner resonator mounting bolts and air cleaner resonator-to-throttle body clamp to specification. Connect negative battery cable and tighten negative battery cable-to-battery bolt to specification.


  1. Install ignition coil. Install the ignition coil bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS . Connect harness connector(s) to appropriate ignition coil(s).
  2. Inspect the wire for proper installation. Push sideways on the boot(s) in order to inspect the seating. Reinstall any loose boot(s).
scientia non olet · About LEMON Manuals