LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Fuel Systems >> Fuel Tank >> Disassembly

Fuel Tank: Disassembly

  1. Remove the EVAP vent valve (1). See EVAP CANISTER VENT VALVE  under MOTORS, RELAYS & SOLENOIDS. See Figure.
  2. Remove the fuel filter (8). See FUEL FILTER .
  3. Disconnect the fuel feed and return pipes from the fuel sender (5). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  4. Remove the fuel feed and return pipes from the retaining clip (7).
  5. Remove the EVAP vent valve pipe.
  6. Disconnect the EVAP vapor pipe from the fill limiter vent valve (4), and the front and rear rollover valves (2, 6). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  7. Remove the EVAP vapor pipes.
  8. Remove the fuel sender assembly (5) from the fuel tank. See FUEL PUMP .
  9. Remove the EVAP canister (3). See EVAP CANISTER .
scientia non olet · About LEMON Manuals