LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Aurora >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Yaw Rate Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the 2 yaw rate sensor mounting nuts (1).
  3. Remove the yaw rate sensor (2).
  4. Disconnect the yaw rate sensor electrical connector (3).
    5. Fig 1: Removing & Installing Yaw Rate Sensor
    G02553178Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals