LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Aurora >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Exciter Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the ignition lock cylinder. Refer to IGNITION SWITCH LOCK CYLINDER REPLACEMENT in Instrument Panel, Gages and Console.
    Fig 1: Removing Theft Deterrent Exciter Module
    G01507512Courtesy of GENERAL MOTORS CORP.
  2. Remove the reader/exciter from the ignition lock cylinder housing (4).
    1. 2.1. Release the clips (1, 2)
    2. 2.2. Slide the reader/exciter off the lock cylinder. Clip (2) may tend to catch on the illumination ring and need to be unhooked.
scientia non olet · About LEMON Manuals