LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Aurora >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the Instrument Panel Trim Plate Bezel. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PAN in Instrument Panel, Gages and Console.
  2. Disconnect the theft deterrent module electrical connector (1).
  3. Release the retainer clip (2) securing the theft deterrent module (3).
    Fig 1: Theft Deterrent Control Module, Retainer Clip & Electrical Connector
    G01507508Courtesy of GENERAL MOTORS CORP.
  4. Slide the theft deterrent module upward out of the Instrument panel retainer.
    Fig 2: Removing Theft Deterrent Control Module
    G01507509Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals