LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Intrigue GLS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Brake Fluid Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

NOTE: To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
  1. Loosen the two retaining nuts and carefully reposition the EBCM to access the brake pressure sensor.
  2. Disconnect the brake pressure sensor electrical connector.
  3. Remove the brake pressure sensor from the vehicle.
scientia non olet · About LEMON Manuals