LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Intrigue GLS >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Use a small, flat-bladed tool to remove the lumbar control switch from the trim panel.
    Fig 1: Removing Lumbar Control Switch From Trim Panel
    G01833206Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (1) from the seat harness.
  4. Remove the switch from the seat.
    Fig 2: Disconnecting Electrical Connector From Seat Harness
    G01833207Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals