LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Intrigue GL >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel Level Sensor >> Removal & Installation

Removal & Installation

  1. Remove fuel sender assembly from fuel tank. See FUEL PUMP . Disconnect the fuel pump electrical connector.
  2. Remove the fuel level sensor electrical connector retaining clip. Disconnect the fuel level sensor electrical connector from under the fuel sender cover. Remove the fuel level sensor retaining clip. Squeeze the locking tangs and remove the fuel level sensor. See Fig 1.
  3. Remove the fuel pump and fuel level sensor electrical retaining clip at the top of the fuel sender assembly. Disconnect the fuel pump and fuel level sensor electrical connector. To install, reverse removal procedure.
Fig 1: Identifying Fuel Sender Assembly Components
G00132264Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals