LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Bravada AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust System Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Exhaust Hangers
    GM753688Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust system to the vehicle and secure with the exhaust system hanger insulators.
    2. Fig 2: Exhaust Pipe To Muffler Joint
    GM753687Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the muffler to the catalytic converter and secure with the nuts.

    Tighten:  Tighten the nuts to 45 N.m (33 lb ft).

  3. Inspect the exhaust system for leaks and underbody contact.
  4. Install the rear axle brace. Refer to Rear Axle Brace Replacement in Rear Suspension.
  5. Install the rear axle tie rod. Refer to TIE ROD (ZR2 MODELS) in Rear Suspension.
  6. Install the spare tire assembly.
  7. Install the frame brace.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals